• 首页
  • 期刊简介
  • 编委会
  • 版权声明
  • 投稿指南
  • 期刊订阅
  • 相关下载
    雷达数据
    下载专区
  • 过刊浏览
  • 联系我们
引用本文:贺音光,谭小敏,杨娟娟,龚紫翼,闫伟. GST时频滤波SAR射频干扰抑制算法[J]. 雷达科学与技术, 2021, 19(3): 304-309.[点击复制]
HE Yinguang, TAN Xiaomin, YANG Juanjuan, GONG Ziyi, YAN Wei. RFI Suppression Algorithm for SAR Based on GST Time-Frequency Filtering[J]. Radar Science and Technology, 2021, 19(3): 304-309.[点击复制]
【打印本页】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 5782次   下载 965次 本文二维码信息
码上扫一扫!
分享到: 微信 更多
字体:加大+|默认|缩小-
GST时频滤波SAR射频干扰抑制算法
贺音光,谭小敏,杨娟娟,龚紫翼,闫伟
西安空间无线电技术研究所, 陕西西安710100
摘要:
空间中存在的射频干扰(Radio Frequency Interference,RFI)会污染合成孔径雷达(Synthetic Aperture Radar,SAR)的回波数据,进而影响成像质量以及基于图像的应用。本文针对RFI的特点,提出了一种基于广义S变换(Generalized S Transform,GST)时频滤波的干扰抑制算法。该算法首先利用配对样本T检验对存在干扰的回波数据进行检测并标记,然后对被标记的回波数据的实部与虚部分别进行处理:将数据变换到广义S变换域,逐条对时间窗内的数据进行子空间滤波完成干扰抑制,接着把干扰抑制后的数据反变换到时域并与未标记信号组成新的纯净回波数据集,最后利用成像算法进行成像处理得到清晰的SAR图像。所提出算法可以在有效抑制SAR数据中射频干扰的同时,减少处理过程中有用信号的损失,实验结果验证了算法的有效性。
关键词:  合成孔径雷达  射频干扰  干扰抑制  广义S变换  子空间滤波
DOI:DOI:10.3969/j.issn.1672-2337.2021.03.011
分类号:TN957.52
基金项目:第六批高分专项青年基金; 深圳市科技计划项目(No.JSGG20190823094603691)
RFI Suppression Algorithm for SAR Based on GST Time-Frequency Filtering
HE Yinguang, TAN Xiaomin, YANG Juanjuan, GONG Ziyi, YAN Wei
Xi’an Institute of Space Radio Technology, Xi’an 710100, China
Abstract:
Radio frequency interference (RFI) in space can contaminate the echo data of synthetic aperture radar (SAR), which in turn affects the SAR image quality and SAR image-based applications. According to the characteristics of RFI, an interference suppression algorithm based on generalized S transform (GST) time-frequency filtering is proposed in this article. In the algorithm, the echo data with interference are recognized and labeled accurately by using paired-samples T test in the first place. Then the real and imaginary parts of the labeled echo data can be dealt with separately as follow: the pending data are transformed into the generalized S transform domain. And in this domain, to complete interference suppression, the subspace filtering method is employed for instantaneous data in each time window one by one. After that, the data after processing are transformed back into the time domain by inverse transform and then formed a new clean echo data set with unlabeled signals. Finally, a clear SAR image can be obtained by using SAR imaging algorithm. The algorithm can suppress RFI in SAR data effectively and reduce the loss of the useful signal during the processing at the same time. The experimental results also verify the effectiveness of the algorithm.
Key words:  synthetic aperture radar (SAR)  radio frequency interference (RFI)  interference suppression  generalized S transform (GST)  subspace filtering

版权所有:《雷达科学与技术》编辑部 备案:XXXXXXX
主办:中国电子科技集团公司第三十八研究所 地址:安徽省合肥市高新区香樟大道199号 邮政编码:230088
电话:0551-65391270 电子邮箱:radarst@163.com
技术支持:北京勤云科技发展有限公司