• 首页
  • 期刊简介
  • 编委会
  • 版权声明
  • 投稿指南
  • 期刊订阅
  • 相关下载
    雷达数据
    下载专区
  • 过刊浏览
  • 联系我们
引用本文:刘琴,李明磊,汪玲,朱岱寅,钱君. 机载气象雷达目标的三维建模方法研究[J]. 雷达科学与技术, 2022, 20(4): 435-441.[点击复制]
LIU Qin, LI Minglei, WANG Ling, ZHU Daiyin, QIAN Jun. Research on 3D Modeling of Airborne Weather Radar Target[J]. Radar Science and Technology, 2022, 20(4): 435-441.[点击复制]
【打印本页】   【下载PDF全文】   【查看/发表评论】  【下载PDF阅读器】  【关闭】
←前一篇|后一篇→ 过刊浏览    高级检索
本文已被:浏览 5526次   下载 987次 本文二维码信息
码上扫一扫!
分享到: 微信 更多
字体:加大+|默认|缩小-
机载气象雷达目标的三维建模方法研究
刘琴,李明磊,汪玲,朱岱寅,钱君
1. 南京航空航天大学, 江苏南京 211106;2. 中国航空工业集团公司雷华电子技术研究所, 江苏无锡 214063
摘要:
三维可视化系统能够为机载气象雷达回波数据分析提供支持。本文以预先提取的气象目标三维点云数据为基础,设计了一种面向机载气象雷达目标的三维建模方法。首先运用α-shape算法提取气象目标的外轮廓点云,并通过主元分析法求取点的法向量,再利用泊松重建算法对具有法向信息的外轮廓点云进行三维表面重建。结果表明,该方法得到的气象目标三维重建结果轮廓清晰,表面细节特征明显,能够反映气象目标的空间结构分布特征。相较于仅使用α-shape算法和移动立方体算法,该方法在重建精度和计算效率方面均有提高。重建模型整体上满足机载气象目标三维建模的要求,可以为未来的机载显控气象信息平台三维可视化提供技术支持。
关键词:  机载气象雷达  气象目标可视化  三维表面建模  α-shape算法  泊松表面重建
DOI:DOI:10.3969/j.issn.1672-2337.2022.04.012
分类号:TN959.4
基金项目:国家自然科学基金(No.41801342); 工信部民机专项项目(No.MJ-2018-S-28); 中央高校基本科研业务费(No.3082020NZ2020008)
Research on 3D Modeling of Airborne Weather Radar Target
LIU Qin, LI Minglei, WANG Ling, ZHU Daiyin, QIAN Jun
1. Nanjing University of Aeronautics and Astronautics, Nanjing 211106, China;2. AVIC Leihua Electronic Technology Research Institute, Wuxi 214063, China
Abstract:
The 3D visualization system can provide support for the analysis of airborne weather radar echo data. Based on the pre-extracted 3D point cloud data of the meteorological target, a 3D modeling method for airborne meteorological radar targets is designed in this paper . The method uses an α-shape algorithm to extract the contour points of the meteorological target. We calculate the normal vectors of points through principal component analysis. Then the Poisson reconstruction algorithm is used to reconstruct the surface of the target. The results show that the 3D models of the meteorological target reconstructed by the proposed method have clear outlines and details, which can reflect the spatial structure distribution characteristics of meteorological targets. Compared with using only the α-shape algorithm and marching cubes algorithm, our method can improve the reconstruction accuracy and computational efficiency. On the whole, the reconstructed models can meet the requirements of 3D modeling of airborne meteorological targets, and can provide technical support for 3D visualization of airborne display and control meteorological information platform in the future.
Key words:  airborne weather radar  meteorological target visualization  3D surface reconstruction  α-shape algorithm  Poisson surface reconstruction

版权所有:《雷达科学与技术》编辑部 备案:XXXXXXX
主办:中国电子科技集团公司第三十八研究所 地址:安徽省合肥市高新区香樟大道199号 邮政编码:230088
电话:0551-65391270 电子邮箱:radarst@163.com
技术支持:北京勤云科技发展有限公司